Tri-Clamp Pressure Lid for FermZilla - 2 in.

Upgrade your FermZilla Conical or All Rounder with the new 2" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid.

This particular lid was designed in order to suit a growing number of customers desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel.

Features:

• (2) PCO1881 Male Ports
  • Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps
• PRV Port with Red 35 psi (2.5 BAR) PRV
• 2" T.C. Ferrule

Undrilled Ports (for optional accessories):

• Thermowell Port (see below for FermZilla Thermowell kit)
• (2) Temp Twister Ports

Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank.

Also includes:

• 2" Tri-Clamp
• 2" T.C. Gasket
• 2" T.C. x PCO1881 Male Thread Cap

If you ever need to replace the O-ring attached to the bottom of the Pressure Lid, a Corny Keg Lid O-ring fits perfectly.

KegLand Part Number: KL28219

Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Warning: Only use Red 35 psi PRV with this lid. Ensure the PRV is cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.